FOCUS: CHEM SHOW
INDEX TO
ADVERTISERS
SELF-CLEANING BALL VALVES
PBM’s self-cleaning ball valves incorporate engineered
technology, including Adjust-O-Seal up-stream sealing and a
flushable ball that thoroughly cleans all the internals of the
valve. Materials are completely removed from the valve
internals with a process line flush. This eliminates costly down time required to dis-
assemble, clean and reassemble traditional valves.
Adjust-O-Seal features in-line adjustment to compensate for normal seat wear.
This reduces maintenance and repair costs and minimizes system downtime by
increasing the time between seat replacements.
FOR MORE INFO: WWW.PBMVALVE.COM
American Foundry Group
www.americanfoundry.com
AUMA Actuators, Inc.
www.auma-usa.com
Bonney Forge
www.bonneyforge.com
Caplugs
www.caplugs.com
C4 Crane Energy Flow Solutions
www.craneflowsolutions.com
17 Delta Valve
div. of Curtiss-Wright Flow Control
www.cwfc.deltavalve.com
44 EIM
www.eim-co.com
25 Farris Engineering
div. of Curtiss-Wright Flow Control
http://farris.cwfc.com
C2 Flexitallic
www.flexitallic.com
41 General Magnaplate
www.magnaplate.com
15 Groth Corporation
www.grothcorp.com
9 Gulf Coast Modification
www.gulfcoastmod.com
35 Highland Foundry
www.highlandfoundry.com
21 Houston Plating & Coatings
www.houstonplating.com
39 Interstate Specialty Products
www.interstatesp.com
31 Key Bellevilles
www.keybellevilles.com
11 Manufacturers Standardization
Society
www.mss-hq.org
29 Parker Hannifin
www.parker.com/fcd
1, 45 The Wm. Powell Company
www.powellvalves.com
C3 PowerGen
www.power-gen.com
23 Rotork Controls, Inc.
www.rotork.com
14 Scientific Linings & Coatings
www.weathercap.com
40 Solon Manufacturing Co.
www.solonmfg.com
24 U.S. Alloys
www.usalloys.cc
47 United Valve
www.unitedvalve.com
49 VanAire, Inc.
www.vanaireinc.com
2 Velan Valve
www.velan.com
43
32
5
19
RELIEF VALVE LIFTS AT 10% OVERPRESSURE
Groth Corporation announces the new 1800A Series full lift type valve
for applications requiring low emissions and operation near tank maximum allowable working pressure (MAWP). The valve is a relief
valve that attains full stable lift at only 10% overpressure. It is
a modulating valve offering near zero blowdown and reseats at
near set pressure. Operating within 10% of the tank MAWP
greatly reduces the breathing losses of the product in the tank.
The 1800A Series valves performs better than the API Bulletin 2521 and ISO
28300 seat leakage requirements. Available in 2-inch (DN 50) through 12-inch (DN
300) flange sizes, this valve provides the user with reduced vapor emissions and better tank corrosion maintenance.
FOR MORE INFO: WWW.CONTDISC.COM
SANITARY CONDENSATE CHAMBER AND
STEAM TRAP ASSEMBLY
Steriflow, a division of Richards Industries’ Jordan Valves,
introduces the SSC Series sanitary subcooled condenser. This
patent-pending, ASME BPE 2007 compliant, sanitary conden-
sate chamber and steam trap assembly was designed to replace the 12-
inch to 18-inch downcomer (drip leg) traditionally installed between SIP tempera-
ture sensors and sanitary steam traps. The SSC reduces that height to 2. 4 inches.
The SSC can significantly reduce expenditures by reducing SIP temperature sen-sor/trap assembly TIC (total installed cost). It also reduces the cost for OEM process
skids and retrofit site-built installations with space limitations.
The product can also significantly lower the average annual SIP time by dramatically reducing the probability of SIP wetted temperature sensor faults and total heat-up time. The design makes it nearly impossible for spent condensate to touch (cool)
the SIP temperature sensor, and even less likely to cool (insulate) any process vessels
or equipment upstream of the trap, during heat up or temperature hold periods.
FOR MORE INFO: WWW.STERIFLOWVALVE.COM
CORRECTION: In the summer issue of
Valve Magazine, we inadvertently ran the wrong photo
with Flowserve’s Durco Plug Seal valve (“New Plug
Valve Design Reduces Maintenance,” page 46). Here
is the correct image of the valve. Visit
www.flowserve.com to learn more about this product,
designed for high-pressure applications in the seawater
reverse osmosis desalination industry.
