Products & PROJECTS
Automated Shut-Off
Valves
Metso has extended its
offering of burner systems
with the introduction of
the Jamesbury
Series
7000/9000
flanged ball
valve solution. Jamesbury automated shut-off valves are designed not
only to meet EN161 and EN264,
as approved by TÜV, but also to provide protection against fire and explosive hazards during
the operation of gas- and oil-burning equipment. When the
electrical signal is interrupted or when air pressure is
lost, these burner valves close within a second to isolate
the gas or oil flow. This action may be initiated either by
safety trip or normal shutdown sequencing.
FOR MORE INFO: WWW.METSO.COM/AUTOMATION
Actuator Extends Cycle Life and
Reduces Maintenance
Flowserve Corporation presents the Automax RG Series
heavy-duty scotch yoke pneumatic actuator. The new actuator offers customers the opportunity to realize savings
through an extended cycle life and reduced maintenance
costs. Most importantly, plant and personnel safety is
enhanced due to the RG’s design, which is compliant to
IEC 61508 Safety Integrity Level 3. This safety standard
emphasizes that the quality and reliability of the equipment forming the safety system are key to the prevention
of failure.
FOR MORE INFO: WWW.FLOWSERVE.COM
Low Pressure Sealed Gate Valve
Unlike other floating seat slab gate valves, the new
WKM Saf-T-Seal model “C6B” gate valve by
Cameron utilizes two floating seats with a
peripheral seal assisted by a wave spring that will
allow this valve to seal at very low pressures. It
comes standard with the company’s patented
“SLS” stem seal, requiring no maintenance.
Additionally, the new stem back seat is
blowout proof and significantly prolongs
stem seal life. These gate valves are fully
compliant to API-6D, API-6FA, and now
ANSI B16.34.
FOR MORE INFO: WWW.C-A-M.COM
High-Performance
Blowdown Valves
Conval’s Clampseal blowdown valves pro-
vide necessary control for continuous boil-
er or turbine blowdown and bottom blow-
off service. These high-performance valves
are fully serviceable in-line and feature uni-
form single-piece gland, cartridge-type
packing chamber and pressure seal back-
seat. An easy-to-use Sizing Form is avail-
able to help specifiers to match the right
blowdown valve with their particular
applications. To meet variable flow appli-
cations, these may be used in tandem with
the Conval Camseal ball valve.
FOR MORE INFO: WWW.CONVAL.COM
Relief Valves Now ATEX Compliant
Groth Corporation announces that the 1700A Series pres-sure/vacuum relief valves and the new 1800A Series full
lift type valves are fully compliant with the
requirements of the ATEX Directive. The 1700A
Series relief valves are designed with inlet and
outlet flanges of the same size to reduce
installation costs by requiring smaller
downstream piping. The 1800A full
lift-type valve is a relief valve that
attains full stable lift at only
10% overpressure. Compliance
with the ATEX Directive
is a legal requirement in
all European Union
Member States.
FOR MORE INFO:
WWW.GROTHCORP.COM
